Maintaining your pool properly is crucial in order to keep your pool clean and healthy. Here are a few easy actions that Swimming Pool Contractors perform. In this way, you will be able to easily maintain your sparkling pool and then go back to enjoying your time! When you're looking after your pool keep in mind those three C's:
Cleaning, Circulation, Chemistry- Pumps for pools should be operating at least 8-12 hours a day to ensure circulation.
- When the pressure rises more than 10-15 position backwash or cleans the filter.
- Get rid of the skimmer and pump basket.
- Keep circular and downward jets.
- Cleaning: Clean steps, walls, and ladders, as well as low-circulation areas every day.
- Daily skim over the surface
- Every week, clean or use an automated cleaner.
Chemistry
- It is recommended to test the water every 1-2 days.
- pH and alkalinity should be in balance.
- Keep sanitizer levels high.
- Bi-weekly shock
- To ensure that your pool looks good, make sure that the water is flowing and well-filtered. get rid of debris and "dead spots" and also balance the water's chemistry.
- The first step to keep your pool spotless and clean is to make sure that your water's circulated.
Circulation
Maintenance of your pool begins with circulation. If the swimming pool isn't flowing or your pump isn't working and your water filter has stopped filtration cleaning your pool, maintaining it is going to be a challenge. This is because stagnant water can be the perfect environment for the growth of algae.
The circulatory system in your pool is made of several parts. The pump, skimmer, jets, and filters are all parts of the whole system. The quality of your water will be affected when any of these components are severely damaged. Here's a quick overview of the way a pool functions to keep the water clear and moving:
- The pump pulls water out of the pool through the Skimmer (usually an open door with a rectangular shape)
- The water is pumped through and into the filter.
- Filters remove particles that can cause issues.
- Pool jets pump water back into the pool.
- The pool pump is a "heart" for your swimming pool. The pump circulates the water through the filtration system which eliminates debris, dirt, and other contaminants. The purified water is returned to the water pool.
- Start the pump in the pool.
- Daily duration 8-12 hours
That's right the more frequently you operate your system of filtration and the clean your water will become and the less time you'll need to devote to removing algae or making sure your water is balanced. If running your system 24/7 isn't possible, try at least 10-12 hours each day. If you reside near a warm climate you'll need to use your pump more frequently. This is the reason Custom Pool Builder in Dallas suggests buying an adjustable-speed pool pump. It can be run at a slower speed throughout the day. This is conserving energy, and money and creates less sound.
Clean Or Backwash The Filter, If Necessary
If needed you must clean or backwash the filter regularly. If the gauge on the filter is reading 10 psi higher than normal, backwash or clean the filter.
If the gauge on your pump is more than 10 pounds above the normal (usually 10-15 PSI for a clean filter) is it time to clean your filter. If you're using an air filter that is cartridge-based it is necessary to wash the cartridge.
Cleaning
The frequency is once per week. Do a brush and skim every day.
The second step of the triplet of pool maintenance is cleaning. This involves brushing the pool, skimming the dirt off the top, and then vacuuming the pool. Manual maintenance is an essential element of ownership of a pool unless you have a robotic pool cleaner that will take care of the job for you.
Brush
The walls are scrubbed using a pool brush helps prevent algae, staining, and scaling, particularly around "dead zones" like crevices, ladders, steps, and under the skimmer.
Skim
Large particles can be cleared by skimming over the surface of the pool with an apron or leaf rake. The debris is not appealing to swimmers, and it can sink to the bottom of the pool, leaving behind stains.
vacuum
Vacuuming is an additional method of getting rid of debris that could cause a decrease in circulation and harm the pool. The vacuum head and hose and pole, which are connected to the skimmer using an air plate could be utilized.
Chem Testing Frequency
1-2 times per week. A shock every two weeks.
Another key element in keeping your water sparkling is chemistry. When your water is balanced and balanced, you're less likely to confront issues such as clouds of water or green waters or the growth of harmful bacteria. Therefore, an effective test kit is an essential item in your toolkit for maintaining your pool.